HomeNewsFeedbackSitemapImprintTECNARO Logo
Logo ARBOFORM

Material data

Mechanical Properties Standard Unit Range*
Tensile strength DIN 53 455 N/mm2 10...22
Ultimate elongation DIN 53 455 % 0,3...0,7
Tensile modulus DIN 53 457 N/mm2 1000...5000
Flexural modulus EN ISO 178 N/mm2 1000...5000
Bending stress En ISO 178 N/mm2 10...50
Impact strength En ISO 179 KJ/m2 2...5
Hardness DIN 53 505 Shore D 50...80
Ball indentation hardness DIN 53 456 N/mm2 20...70
Thermal Properties Standard Unit Range*
Expansion coefficient DIN 53 752 I/°C 1*10E-5...5*10E-5
Vicat temperature DIN 53 460 °C 80
Martens temperature DIN 53 462 °C 54
Thermal conductivity DIN 52 612 W/(m*K) 0,384
Hot-wire test DIN EN 60669-I --- 650°C passed
Electrical Properties Standard Unit Range*
Conductivity, surface DIN 53 482 G Ohm 5
Conductivity, continuity DIN 53 482 G Ohm 3
Other Properties Standard Unit Range*
Mould shrinkage --- % 0,1...0,3
Density (in compact moulding) --- g/cm3 1,3...1,4
Water content --- % 2...8
Bleeding of various elements DIN EN 71-3 --- passed
Saliva and sweat fastness DIN 53 160 --- passed
Fire performance DIN 4102-B2 --- passed

* depending on formulation