Material data

Mechanical Properties	Standard	Unit	Range*
Tensile strength	DIN 53 455	N/mm2	10...22
Ultimate elongation	DIN 53 455	%	0,3...0,7
Tensile modulus	DIN 53 457	N/mm2	1000...5000
Flexural modulus	EN ISO 178	N/mm2	1000...5000
Bending stress	En ISO 178	N/mm2	10...50
Impact strength	En ISO 179	KJ/m2	2...5
Hardness	DIN 53 505	Shore D	50...80
Ball indentation hardness	DIN 53 456	N/mm2	20...70
Thermal Properties	Standard	Unit	Range*
Expansion coefficient	DIN 53 752	I/°C	1*10E-5...5*10E-5
Vicat temperature	DIN 53 460	°C	80
Martens temperature	DIN 53 462	°C	54
Thermal conductivity	DIN 52 612	W/(m*K)	0,384
Hot-wire test	DIN EN 60669-I	---	650°C passed
Electrical Properties	Standard	Unit	Range*
Conductivity, surface	DIN 53 482	G Ohm	5
Conductivity, continuity	DIN 53 482	G Ohm	3
Other Properties	Standard	Unit	Range*
Mould shrinkage	---	%	0,1...0,3
Density (in compact moulding)	---	g/cm3	1,3...1,4
Water content	---	%	2...8
Bleeding of various elements	DIN EN 71-3	---	passed
Saliva and sweat fastness	DIN 53 160	---	passed
Fire performance	DIN 4102-B2	---	passed

* depending on formulation